Sunday, October 12, 2008

Photoshop Tutorials: A Slick Supernatural Text Effect

A Slick Supernatural Text Effect

In Text Effects by Collis
In this tutorial we'll be creating a smoky night effect on text to give it an eerie supernatural sort of feel. It's a good exercise in using the Wave distortion filter...

Step 1

The first thing we need for our image is a background. We're going to use a quick star-sky background. There are lots of tutorials around for this effect, and it's actually a simple two-step process: clouds + noise.

So on a new blank canvas, start by choosing a dark blue color - #18323a - and black and then go to Filter > Render > Clouds.

Step 2

Now create a new layer, fill it with black, and go to Filter > Noise > Add Noise and use values roughly as shown below.

Step 3

Now that is way too much noise, so go to Image > Adjustment > Levels (or Ctrl+L) and bring those sliders together until you see most of the 'stars' vanish as shown.

Step 4

Now set the stars layer's blending mode to Screen so that the black vanishes and just the stars remain. It's still a bit too even though, so add a Layer Mask to the layer, and with a large fat brush just mask out blobs so that it seems a little less even. See the screenshot below to see the layer mask I added...

Step 5

In this step, I added a radial gradient layer going from the white in the center to black at the edges and set the layer to Overlay and 45% Opacity. The effect is just to darken the edges and it's not an essential step. In any case you should have something like this image shown below.

Step 6

Now we add our text. I've used a font called Cuez_Ver6 which looks suitably strange. If you go to a free font site and look under sci-fi or the like, you'll doubtless find something similar. Actually it's quite unreadable really (especially the r), but who cares, it looks cool!

Step 7

Next we're going to add some layer styles. You can get a sample PSD file at the end of this tutorial, but because we're switching to a pay system for the samples, I'll go through the settings in case you don't want to buy the file.

First I've given the text a Color Overlay of straight black (#000000). Then because the basis of this text effect is a creepy light, I added inner glows. First an Inner Glow as shown below, and then an Inner Shadow with color #54a4ff, blend mode Screen, distance 1, size 2, angle -90', and everything else default.

Step 8

Next we use a textured Bevel and Emboss to give the style some unevenness. You can see the Bevel settings below. The Texture I added is just one of the standard ones that comes with Photoshop that looks like bubbles. And I set the Depth to -79.

As you can see below, this makes the inner glow look a lot more uneven.

Step 9

Finally I added a Drop Shadow and Outer Glow, both set using Screen and the color #008ac5. I used both so that I could make one of them a small glow and one a really spread out glow, so the distances were 10px and 100px.

Step 10

Ok, so here's our text with the Layer Style applied. It's off to a good start, but you can only do so much with Layer Styles, so now we do some good ol' manual effects.

Step 11

First of all, duplicate the text, right-click the layer, and remove the layer styles. Then change the color of the text to a fluorescent blue (#5cdbff). Then press the up arrow once to move it one pixel up. This will give a sort of glow effect as shown below.

Step 12

Ok, this next step is the key step in this tutorial.

Duplicate the text layer with the fluoro blue color. Then go to Filter > Distort > Wave. You can use mostly the default settings, except where it has Scale. I've set this to just 10% and 10%. This will distort the text, but only a little bit. If you leave it at 100% the effect is pretty full-on!

(Note: In the image below, I moved the text down so that it would be clear that I was applying the wave filter to it.)

Step 13

After you have distorted text, go to Filter > Blur > Gaussian Blur and use a value of 4px. Then set the Opacity to 20%.

In the screenshot below, I've switched off the main text so that you can see the distorted text.

Step 14

Now hold down Ctrl and click on that text layer to select it's pixels and then go to Select > Modify > Contract and use a value of 5px. Then press Shift+Ctrl+I to invert the selection and hit Delete. This should leave a thin wispy looking remnant of your text.

Now switch on the main text layer, and it should look like a tiny bit of smoke coming off the letters.

Step 15

Now duplicate that layer and go to Filter > Distort > Wave and distort this copy even more.

Now repeat this step a couple of times and vary what you do with the wave. So you might want to press Randomize sometimes, or sometimes distort the copy a few times. Also I used a mix of blending modes on the different copies of the smoke. Two of them I had no blending mode set, two of them I used Overlay, and for another two I used Hard Light.

Also it's a good idea to mix up whether they are behind or in front of the text. Remember you want the effect to look like wisps of smoke coming off the letters.

Step 16

Now that we have our small smoke sorted out, it's time to add some bigger wisps.

So again duplicate the fluoro blue text layer.

Step 17

We now apply another Wave distortion, but this time where it has Scale, set the horizontal to 5% and the vertical to 100%. This will make the shapes become very elongated as shown. Once you've applied the wave, just repeatedly hit Ctrl+F to keep doing it over and over again until the text has been completely distorted into long wispy shapes.

Step 18

Once you have a good smoky-looking effect, set the layer blending mode to Hard Light and you should have something similar to the image shown below.

Step 19

Now duplicate that last layer and run a Gaussian Blur by going to Filter > Render > Gaussian Blur with a value of 4px. This will make our layer look a little softer.

After that, get a large soft eraser brush and just brush away some of the bits at the bottom and top so that it fades off as it approaches the edges.

You may also want to repeat these last couple of steps to add more wisps.

Step 20

Here I've removed the bottom of those wisps and added a few more subtle copies. Also I added some extra type above the main text just to make it look a bit cooler.

Step 21

Next I moved one or two of the wispy layers in front of the text so that it looks like the smoke is trailing over the letters. In particular look at the E in super to see what I mean.

Step 22

Finally, to give it a more eerie feel I added a layer above all the others and with a large brush painted some green on top, then set the layer blending mode to Color to make it so that the image is a blue-green coloring. And we're done! One slick, smoky effect!


Source: psdtuts.com

Photoshop Tutorials: Create a Spectacular Flaming Meteor Effect on Text

Take typography one step further by having text falling from the sky in a burning inferno. Yes, this is the text-on-fire tutorial to end all tutorials. It uses a little Illustrator for the text and a lot of Photoshop to burn up the screen!

It's always a good idea to keep your eyes open for inspiration for effects and designs no matter what you are doing. Graphics are everywhere and you can learn a lot by looking at what other people do.

Step 1

First create a new document and fill it with a dark grey.

Amazing Fire Tutorial

Step 2

Create a new layer, call it "Clouds," and using the Lasso Tool (L), make a selection similar to the one I've shown below.

Set your background color to a 50% grey and the foreground to a dark grey. Go to Filter > Render > Clouds and, holding the Alt key, create clouds. After that go to Images > Adjustments > Levels, and change the input levels and output levels until you make the clouds neither too dark nor too light (see the image shown).

This layer will be on top of the others.

Amazing Fire Tutorial

Step 3

Create another layer and repeat Step 2, but this time just change the background color from 50% gray to a blue or green color. This will create a small cloud, lighter than the big one.

Amazing Fire Tutorial

Step 4

Now we'll switch to Adobe Illustrator to create some text. I used Times New Roman for the font. After that go to Effect > 3D > Extrude and Bevel. Now we will create the 3D text. Rotate the object and change the perspective. You can use the same values as I did (shown below).

Amazing Fire Tutorial

Step 5

  1. Copy the 3D text and paste it in Photoshop.
  2. Place it in the center and add some Noise (Filter > Noise > Add Noise).
  3. Now let's change the Layer Style. First add Bevel and Emboss.
  4. After that, let's add a Gradient Overlay.
Amazing Fire Tutorial

Step 6

  1. Duplicate the Type layer and add a Motion Blur (Filter > Blur > Motion Blur).
  2. Set the angle of the blur to -53.
  3. Change the layer mode to Linear Dodge (Add).
  4. Create a Folder, call it "Typo," and move these two layers into it.
Amazing Fire Tutorial

Step 7

Create a new layer and repeat the Step 2, this time using a selection as shown going out the back of the letter T. This will create the trailing smoke.

Amazing Fire Tutorial

Step 8 Creating the FIRE

1 - Create a new layer and call it "fire1."
2 - With the Elliptical Marquee Tool (M), create a selection.
3 - Set the background color to light grey and the background to black.
4 - Create clouds as we did in Step 2.
5 - Change the Levels to increase the contrast;
6 - Change the Hue/Saturation with Colorize selected until you get an orange/yellow color.

Amazing Fire Tutorial

Step 9

Create a new layer, call it "blazes," and repeat Step 8. After that, duplicate the layer and call it "flames." Create a folder and move the Fire1, Blazes, and Flames layers to this folder and call the whole folder "Fire." It will be on top of the Typo layer.

Amazing Fire Tutorial

Step 10

Select the layer "blazes" and go to Filter > Liquefy. There select the Turbulence Tool (T). Now, on the edges of the fire, start creating some blazes. Use it like you would the smudge tool.

Amazing Fire Tutorial

Set 11

After the Liquefy, go to Edit > Transform > Warp and change the blaze's form to something similar to the image below. After that apply Filter > Sharpen > Sharp.

Amazing Fire Tutorial

Step 12

  1. Create a new layer and call it "yellow color."
  2. Create an ellipse selection with 30px feather and fill it with white.
  3. After that edit the Layer Style and apply a Color Overlay using an yellow color and Multiply for the layer's blend mode.
Amazing Fire Tutorial

Step 13

The order and the Blend modes for the fire are:

  1. Flames: Lighter Color
  2. Blazes: Normal
  3. Fire1: Lighten
  4. Yellow Color: Multiply

Step 14 Sparks

For the sparks we will use brushes. Create a folder and call it "Sparks." It will be on top of the Fire folder.

  1. Inside the folder, add a new layer.
  2. Fill it with black and change the Blend Mode to Color Dodge.
  3. Select the Brush Tool and let's create a brush.
  4. In Brush Tip Shape, change the Diameter to 12, and increase the spacing.
  5. Select Scattering and set Scatter to the 1000% and Control to off. Change the Count to 2 and Count Jitter to 100%.
  6. Select white and start painting some sparks.
Amazing Fire Tutorial

Step 15

Create a new layer and repeat the Step 14 but now change the Scatter Option to 0%. Start creating some single line sparks like swirls.

Amazing Fire Tutorial

Step 16

Here I used the Gomedia Spraypaint brushes to create those tiny little sparks, but you can repeat the step 14 changing the Brush size only. Basically, create a new layer, put it behind the others, fill it with black, change the Blend Mode to Color Dodge, see the color to white, and create the sparks.

Amazing Fire Tutorial

Conclusion

Amazing Fire Tutorial

Source: psdtuts.com